Showing posts with label packing. Show all posts
Showing posts with label packing. Show all posts

25 December 2010

I leave in under nine hours.

At around 7.45 Australian Central Standard Time (ACST), I shall be departing on my scootering odyssey. In other words, in a little under nine hours.

I think that I'm somewhat organised. My scooter is packed, I don't think I've forgotten anything, and it all fits. And without too many issues. If I were forced to, I could probably pack a little better to achieve more free space, but there's little in my backpack other than supplies.

As long as I remember to empty the kitchen bin, then I'll have pretty much covered everything that I need to do before departure.

I'm writing this post using my netbook and mobile phone as a 3G for connectivity. I thought I'd better test it before departing Adelaide. No issues whatsoever - the wonders of an Android mobile and the Linux distribution Peppermint OS mean that it was completely configuration-free and totally painless. Not sure why I doubted that it would be anything other than perfect....

Time for bed for an early departure!

21 December 2010

Mounting the jerrycan.

Another issue solved today was the mounting of the jerrycan (if you don't know the term or its history, Wikipedia's entry makes for interesting reading).

I'd been looking around for a container that I could use as the basis for fashioning a rack to hold the jerrycan and a litre of two-stroke oil, but without success. Thanks to the versatility of a scooter, there's no need to strap them to the back of the vehicle (as would be the case on a motorcycle) - they can be placed between the feet in front of the seat. Like this:

 
As it turns out, my jerrycan and chosen brand of oil fit perfectly in the space. Now to secure them for the ride...

As the basis for my rack - an old wire drawer:


Trimmed and bent into shape, it holds the containers nicely. In case you are wondering why it doesn't extend the full length of the space, it's because I still need to open the fuel flap to refuel - a full rack would prevent this (the key slot is visible behind the jerrycan, below the seat).


To secure the containers during bumpy sections of road and to discourage anybody from simply walking away with them, a top section was also made.


The mounting to the scooter wasn't as obvious as I had hoped. I had planned to drill a few holes through the floor and then use brackets to secure the rack. However, a quick look under the floor showed that there was no space to drill through and secure bolts, so another method of fixing was needed. The solution: two strips of dowling, with notches carved out to hold the rack in place, secured with a few spots of epoxy resin. Not elegant, but ought to work well.

 To make it effort look better, I spray painted the pieces.


The end result doesn't look too bad.

 

To ensure that the rack was mounted properly, I took the scooter out for a quick test ride with a full jerrycan to find out how well it performed.

Things I learnt:
  • The jerrycan takes over 5.5 litres (rather than the advertised 5 litres), but overfilling it isn't a good idea as the pouring nozzle has to go back into it;
  • Petrol smells are hard to remove from one's hands;
  • The scooter handles very differently with an extra 7kg on the floor - it doesn't want to turn in as well as without it;
  • The paint will likely look far worse than it currently does by the end of the trip, as it will flake off;
  • Petrol spills won't dissolve the epoxy resin, as I discovered when I spilt fuel whilst refilling the tank from the jerrycan after I (deliberately) ran out of petrol;
  • Running out of petrol isn't a good idea as it take the scooter a while to start again as petrol moves through the fuel system;
  • The petrol smell still lingers after washing my hand several times.
I'll need to make sure that I remember that the bottom rack is attached whenever I ride the scooter between now and departure, as it isn't particularly visible. I don't want to mangle it, given how well it works.

The test pack.

In the last few days I haven't been (completely) idle with my preparations. I can barely afford to be idle - my departure is only five days away.

Of the most notable achievements, I have now purchased most of the items on my to-purchase list.

As a consequence, last night I thought it appropriate to try a test pack. Not least because if there is a problem that I am going to encounter in the preparations that will be difficult to overcome, it will be discovering that I do not have enough storage space for the items that I need to take with me.

So I chose to undertake a test packing, just in case alternate storage was needed.

And this is how the first test pack went:


Success! Everything pretty much fitted, as hoped for. Important to mention is that I wasn't particularly careful with how I placed items (especially in the under-seat storage area), so with a bit of effort I am sure that I could make more space.

Lying on the ground to the right are a couple of items that won't be going in the storage space that I have - the hydration pack, notebook and backpack. That is, the rucksack ought to ideally go in storage, but there is no space for it. Okay, not a complete success with fitting everything in... The only other concession I have had to make is only taking four days' worth of clothing (I had hoped for five, but the top box isn't quite large enough).

I really don't want to have to wear the rucksack - particularly as the primary purpose of taking with me is to put my jacket in it whenever I am sightseeing/away from my scooter (due to the size of the back armour, there's no hope of the jacket fitting under the seat and I don't want to wear it if it's warm). I'll already be wearing the hydration pack (with up to 3 litres of liquid) and my camera, so I don't want the additional weight. It would also hide the reflective strips on my back.

Looking at the straps on the backpack, I came up with a better solution - strapping it to the top box. With the various clips, buckets and straps, it is possible to attach it securely so that it can remain on the scooter at speed(!), plus has the added advantage of allowing me to access items that I may need whilst riding without having to look in the storage areas. It also gives me a little extra storage space, should I happen to need it.


My top speed unlikely to be an issue and providing I keep an eye on it initially to ensure that it is securely mounted (or test it before I leave, time permitting), there should be no problem. Of course, were it to rain, the backpack will get wet pretty quickly, so I may need to investigate a cover for it.

At some point I'll get around to posting a full list of what I am taking with me.

12 December 2010

Tents and test runs.

As the weather was decent today, I thought it prudent to set the tent up in the garden to:
  1. Make certain that it is complete and not missing any pieces;
  2. To minimise the risk of embarrassment the first time I do so in public.
Having confirmed that all pieces are present, and having only bent one tent peg, I can confirm that the risk of embarrassment isn't completely gone. Especially if it's raining or windy.

Anyway, this is how it looks:
 Not exactly well built at this stage...

It certainly would not take a family of twelve...

The door opens to reveal...

That I can even lie flat in it (just) - and how
badly-assembled it was on the first attempt.

It also only took two attempts to get the tent back into the bag. Sort of.

I also had a quick test pack of the large items that I already have to see how well they will fit into the storage space available. No photos, but limited as the space is, I mightn't need too much extra. Well, that's the theory.

I also had a look yesterday to see what other storage options I could add to the scooter, just in case. This was inspired by Chris's photo of his preparation for his upcoming ride from Newcastle to Sydney, via Darwin, Adelaide and Melbourne, which caused me to question exactly what I'd forgotten to consider taking.

I found an excellent waterproof gas mask bag that, in conjunction with a matching bag, would make an excellent set of (small) panniers. There was, unfortunately, only one bag available.

Either way, given the lack of engine power available, I need to pack as lightly as possible, so I may well be better off without having the extra storage space available to fill with more luggage.

We'll see.